+ Reply to Thread
Results 1 to 3 of 3

Thread: 1994 1.9L AAZ Cylinder Head

  1. #1
    New Member Andman is on a distinguished road
    Join Date
    Jan 2012
    Location
    Edmonton, AB
    Posts
    1

    1994 1.9L AAZ Cylinder Head

    Hi there! Has anyone here had much experience with cylinder heads from the AAZ Diesel? Im wondering about a reliable supplier for parts and what is normally done on a typical reman. Cheers

  2. #2
    Veteran Member dubonic possesion has much to be proud of dubonic possesion has much to be proud of dubonic possesion has much to be proud of dubonic possesion has much to be proud of dubonic possesion has much to be proud of dubonic possesion has much to be proud of dubonic possesion has much to be proud of dubonic possesion has much to be proud of dubonic possesion's Avatar
    Join Date
    Nov 2008
    Location
    ayr ,ontario
    Posts
    1,460
    i've built a couple, generally they get valve seals and guides, i got them at a local supplier that you most likely will not have out in AB. your local NAPA or decent parts store should be able to get you what you need.
    it is very common for there to be cracks between the valves, when you look at the combustion chamber, as long as the crack is no more then 3mm deep OR does not go under the valve seat they it will be fine to reuse that head, if you are replacing any valves be sure to pick up some valve lapping compound, and read up on the lapping process( if not familiar) to ensure you get a good seal. any other questions feel free to shoot me a PM
    Well, excuse me, for having ENORMOUS flaws, that i don't work on !
    www.berlinklassik.ca be there !

  3. #3

    cialispharmaciefr24.com

    If you have overheated and warped or cracked your cylinder head, this is what you need!

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. WTB: 1.9TD ( AAZ ) Cylinder head ....ASAP
    By KtownDub in forum Want To Buy
    Replies: 5
    Last Post: 03-23-2011, 12:39 PM
  2. Cylinder head bolts
    By ABAGTI in forum General Engine Discussion
    Replies: 7
    Last Post: 01-21-2010, 11:00 PM
  3. WTB: 1.8 cylinder head w/40mm valves
    By dubonic possesion in forum Want To Buy
    Replies: 4
    Last Post: 01-26-2009, 04:26 AM
  4. WTB:mk3 IDI (TD) cylinder head
    By boostaddict in forum Want To Buy
    Replies: 2
    Last Post: 11-11-2008, 04:43 PM
  5. WTB: G60 cylinder head
    By sethrocon in forum Want To Buy
    Replies: 2
    Last Post: 12-20-2007, 02:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts